@6016.ADF - SMC3016/MC Ethernet Card 

SMC aquired Western Digital's network cards. So a WD8003 corresponds to a Elite 16 8003. 
NOTE: Microchannel has been purged from SMC's site (16 Jan 03)
3016.exe   3016 Driver and utility disk 
3016MC-UGD.pdf   3016 Users Guide 

30xx Series of Ethernet Drivers for  3016MC (Ask ME for individual files)
3016wtcp.exe (8.0K) Compatible Platforms for 3000 Series adapters 
3sd311.exe (762.2K) Latest Superdisk for 3000 Series adapters 
conftst.exe (21.3K) Confidence Test for 3000 Series adapters 
ftp230.exe (17.2K) Ftp Packet driver 
netb211.zip (35.2K) Netbios driver V 2.11 
newndis.exe (35.1K) Ndis driver 
wfw311.exe (73.7K) Windows for Workgroup drivers

U10 - Fujitsu MB86950B "NICE(?)" Ethernet Controller
JP1 - Unknown, open on my adapter - possibly for AUI/Coaxial selection.
JP2 - Unknown, open on my adapter - said to be "not installed" on the Ardent Tools
RX, TX - Green LEDs visible through exterior card bracket
 

Selecting Cable Connector
   Jumper J1 and the pulse transformer T1 are used to select the cable type used 

Board	Connector	Cable	J1	T1
3016TP/MC	RJ45	TP	OUT	IN
	AUI	Thick	IN	OUT
3016MC	BNC	Thin	OUT	IN
	AUI	Thick	IN	OUT

LEDs

TX	Transmit
RX	Receive
COL	Collision (3016TP only)
LNK	Link integrity (3016TP only)

I/O Address Range
   Selects a 32 byte IO address range for the SMC3016/MC registers 
  <0300-031F>, 0340-035F, 0360-037F, 1980-199F, 2000-201F, 5680-569F, 5900-591F 

Boot PROM Address Range
   Selects an 8K byte memory address range for the Boot PROM. If there is no PROM installed, or you want to disable its operation, then select <PROM not used> 
 <PROM not used>, C200-C3FF, C400-C5FF, C600-C7FF, C800-C9FF, CA00-CBFF, CC00-CDFF, CE00-0CFF, D000-D1FF, D200-D3FF,  D400-D5FF, D600-D7FF, D800-D9FF, DA00-DBFF, DC00-DDFF, DE00-DFFF 

Interrupt Level Selection
    <IRQ3>, 9 (2), 10, 11, 15, 5, 4, 12 
NOTE: These options are currently not supported   IRQ14, test only, IRQ7, IRQ6